Flathead Supplies

This is an attempt to list sources of flathead related supplies and parts. I will include sources of new and used parts, but I am mostly interested in engine parts. A listing on this page is not an endorsement in any form. I don't want to get into a good/bad argument about any source. This is simply a listing of contact information. Don't forget to look for street rod magazines, other old car magazines, and any local car clubs and swapmeets. As usual, do your homework before you buy!

"32-53 Ford Flatheads: Cars, Trucks, Parts - Buy, Sell, Trade"
Jeff Elder
16 Fern Ridge
Lehighton, PA 18235
"We manufacture heads, manifolds, flywheels, main bearing caps, and transmission adapters."  The Sharp intake manifold, shown in the vintage adds section, is one of their current products. The rights and patterns were transferred from Al Sharp himself.
"My name is Wm. Jerry Frear and I rebuild Ford Flathead V8 engines. I do custom work only.  You may call me @ 541-672-1515 for any info or contact me at my email address:  frearfordflathd@aol.com"
"Red is an engine builder and has been in to flathead Fords for 40 years, always working on them.  Now we have evolved in to Red's Headers & Early Ford Speed Equipment, and we sell by telephone order while Red builds flatheads and designs new exhaust parts for flatheads.  We have quite a new and used parts selection, most all engine parts, a library of good blocks, three (currently) whole used running engines for sale, and just about any other good mechanical part Red has ever pulled off an old Ford.  Because Red is a flathead dragracer, he's kept a lot of speed equipment (and sold a lot, too).  We sell Weber flywheels,  beautiful things, and had them configured for both early and late flatheads.  We sell Ross pistons, and they are equally beautiful.  Heads and intakes, dress-up stuff, lifters, valve changeover kits, cams (choices here), and cranks."
Custom parts and other supplies.
"I sell used flathead speed equipment.  Multiple carb. intakes, high comp.heads.  Racing cams also, and so on.  If you would like to contact me, my name is Bruce Dahl.  I live in Davenport, Iowa.  My mailing address is...  916North Utah Ave.    Davenport, Iowa  52804.  You may email me at my friend's house at Dyoung3602@AOL.COM."
"We have a business that caters to Flathead owners. We have been around for 15 years and have a good reputation."
"I have lots of misc. parts for flatheads, not just engine parts, but everything.
Chattaroy, WA 99003  509/238-6225  email:  PM99003@msn.com"
"Stromberg "97"--"48"--"81" and Holley (Ford) "94" Carbs for all years of Ford Flathead. I have correct models for all years or will rebuild your core.
Rebuilt to better than new with all gasket surfaces milled true to give you a leakproof carb. $ 125. with core.  I also setup 2 duece and 3 duece hot rod setups for streetrods. Polished or chrome carbs availble--also linkage, fuel blocks, lines and air cleaners. E-mail CPrice@aol.com
fax 561-569-7028  ph 561-778-0809"
"We build full scale models of all engines-Ford, Chevy, Chrysler, etc.  One of my favorite is the flathead and we also build the Ardun Heads and Valve covers.  This engine is 2 inches more is width than the 426 Hemi. Most of our sales go to fans of the flathead who remember Ardun Heads. If you are interested please contact me throught web site or call 800-322-3285.  I will have a new catolog out in a couple of months however I do presently have 6 page color bouchure.  I also have copies of the orginial blueprints of the Ardun Flathead engine. I send these with the sale of the engine along with the story of the history of building of the Ardun Flathead."

Back to the main flathead page.